For Interior Walls & Ceilings including Previously Painted surfaces and Bare Plaster, Brick, Stone etc

Non-Spatter, thick, creamy viscosity - Ready-to-use in White & 372 premixed colours.
Durable, super-breathable reinforced limewash – best applied by medium pile roller.

Where To Use Lakeland LIMEWASH-PAINT

Interior Walls & Ceilings including previously painted walls & ceilings, plus bare Plaster, Lime
Plaster, Lime Render, non-dusty Limewash, Cob, Stucco, Wattle & Daub, Breezeblock, concrete blocks, cement render, Stone, concrete, Brickwork etc.
Coverage: approx 50m2 per 5 litres /coat (2 coats needed) - depending on the substrate.
Drying Time: normally touch dry within one hour and recoatable after 4 hours.
Sheen Level: super-matt <5%.
2 coats are normally needed – ideally by medium pile roller.
For full product details please refer to the product PDF

Cannot be colour-matched.
Download Data Sheet (PDF)

FAQ's

What is limewash paint?

What does limewash paint do?

Does limewash paint rub off?

What's the difference between limewash paint and lime wash?

Do you need to seal limewash paint?

How long does limewash paint last?

Can you use limewash paint over existing paint?

Do you need a special brush for limewash paint?

How do you apply lime wash paint?

How do you remove limewash paint?

How do you clean limewash paint?

—-

1. What is limewash-paint?

Limewash-paint is a non-dusty modified natural paint made from ingredients including calcined clay, lime-stone, etc for a breathable, ultra-matt finish that is perfect for most interior walls & ceilings. Lakeland's Limewash-Paint is non-spatter, thick, creamy, super-easy to use and completely solvent-free, VOC-free, and independently tested to guarantee 0.00% VOCs.

2. What does limewash-paint do?

Limewash-paint allows walls to "breathe," making it excellent for regulating humidity and preventing dampness. It creates a super-matt non-dusty finish and is naturally resistant to mould and bacteria. Lakelands' Limewash-Paint goes further by being free from harmful solvents and VOCs, making it safe for homes, including nurseries, children's bedrooms, and spaces used by people with asthma or chemical sensitivities.

3. Does limewash-paint rub off?

No - Lakelands' Limewash-Paint forms a durable, reinforced layer that resists rubbing off. However, like traditional lime-based products, it has a slightly uneven finish which can be accentuated if preferred.

4. What's the difference between limewash-paint and limewash?

Traditional limewash is a milky-thin lime-and-water mixture that requires more preparation and maintenance. Lakeland Limewash-Paint, on the other hand, is pre-mixed with advanced technology for enhanced durability, consistency, and ease of use. It's available in white and 372 stunning colours, unlike the limited colour palette of traditional limewash.

5. Do you need to seal limewash paint?

No - Sealing isn't required for most applications, as limewash-paint is naturally breathable and durable.

6. How long does limewash-paint last?

With proper application, Lakelands' Limewash-Paint will last for many years & decades. Its long-lasting finish is due to its reinforced formulation, which outperforms traditional limewash products. Reapplication may be eventually needed in high-wear areas, but its durability makes it a low-maintenance choice.

7. Can you use limewash-paint over existing paint?

Yes, Lakeland Limewash-Paint can be applied over existing paint, provided the surface is clean, grease-free, and properly prepared. It's well suited to porous surfaces but is also ideally suited to previously painted walls and ceilings too. Two coats are recommended for optimal coverage.

8. Do you need a special brush for limewash paint?

While a medium pile roller is ideal for most applications, brushes can be used for cutting-in, corners, edges, and intricate areas. For a textured finish, professionals may opt for specialized limewash brushes - pls ask for advice or see online tutorials.

9. How do you apply limewash-paint?

To apply Limewash-Paint, just ensure the surface is clean, sound, and dry. Stir thoroughly and avoid applying in direct sunlight or extreme temperatures (below 5°C or above 25°C). Apply two coats with a medium pile roller, allowing at least 4 hours of drying time between coats. Refer to the online product PDF for more information.

10. How do you clean limewash-paint?

While its durable formula easily resists everyday wear, if a washable finish is required then it's maybe better to choose a different product - here at Lakeland Paints we have 43 types of paints for all sorts of applications.